Questions - Resistance
Question file 6
- The total resistance in a parallel circuit:
STUDY NOTES
- is always less than the smallest resistance
- depends upon the voltage drop across each branch
QUESTIONS
WITHOUT ANSWERS
- could be equal to the resistance of one branch
- depends upon the applied voltage
========= Answer is a =========
- Two resistors are connected in parallel and are connected across a 40 volt battery. If each resistor is 1000 ohms, the total battery current is:
- 40 ampere
- 40 milliampere
- 80 ampere
- 80 milliampere
========= Answer is d =========
- The total current in a parallel circuit is equal to the:
- current in any one of the parallel branches
- sum of the currents through all the parallel branches
- applied voltage divided by the value of one of the resistive elements
- source voltage divided by the sum of the resistive elements
========= Answer is b =========
- One way to operate a 3 volt bulb from a 9 volt supply is to connect it in:
- series with the supply
- parallel with the supply
- series with a resistor
- parallel with a resistor
========= Answer is c =========
- You can operate this number of identical lamps, each drawing a current of 250 mA, from a 5A supply:
- 50
- 30
- 20
- 5
========= Answer is c =========
- Six identical 2-volt bulbs are connected in series. The supply voltage to cause the bulbs to light normally is:
- 12 V
- 1.2 V
- 6 V
- 2 V
========= Answer is a =========
- This many 12 volt bulbs can be arranged in series to form a string of lights to operate from a 240 volt power supply:
- 12 x 240
- 240 + 12
- 240 - 12
- 240 / 12
========= Answer is d =========
- Three 10,000 ohm resistors are connected in series across a 90 volt supply. The voltage drop across one of the resistors is:
- 30 volt
- 60 volt
- 90 volt
- 15.8 volt
========= Answer is a =========
- Two resistors are connected in parallel. R1 is 75 ohm and R2 is 50 ohm. The total resistance of this parallel circuit is:
- 10 ohm
- 70 ohm
- 30 ohm
- 40 ohm
========= Answer is c =========
- A dry cell has an open circuit voltage of 1.5 volt. When supplying a large current the voltage drops to 1.2 volt. This is due to the cell's:
- internal resistance
- voltage capacity
- electrolyte becoming dry
- current capacity
========= Answer is a =========
- A 6 ohm resistor is connected in parallel with a 30 ohm resistor. The total resistance of the combination is:
- 5 ohm
- 8 ohm
- 24 ohm
- 35 ohm
========= Answer is a =========
- The total resistance of several resistors connected in series is:
- less than the resistance of any one resistor
- greater than the resistance of any one resistor
- equal to the highest resistance present
- equal to the lowest resistance present
========= Answer is b =========
- Five 10 ohm resistors connected in series give a total resistance of:
- 1 ohm
- 5 ohms
- 10 ohms
- 50 ohms
========= Answer is d =========
- Resistors of 10, 270, 3900, and 100 ohm are connected in series. The total resistance is:
- 9 ohm
- 3900 ohm
- 4280 ohm
- 10 ohm
========= Answer is c =========
- This combination of series resistors could replace a single 120 ohm resistor:
- five 24 ohm
- six 22 ohm
- two 62 ohm
- five 100 ohm
========= Answer is a =========
- If a 2.2 megohm and a 100 kilohm resistor are connected in series, the total resistance is:
- 2.1 megohm
- 2.11 megohm
- 2.21 megohm
- 2.3 megohm
========= Answer is d =========
- If ten resistors of equal value R are wired in parallel, the total resistance is:
- R
- 10R
- 10/R
- R/10
========= Answer is d =========
- The total resistance of four 68 ohm resistors wired in parallel is:
- 12 ohm
- 17 ohm
- 34 ohm
- 272 ohm
========= Answer is b =========
- Resistors of 68 ohm, 47 kilohm, 560 ohm and 10 ohm are connected in parallel. The total resistance is:
- less than 10 ohm
- between 68 and 560 ohm
- between 560 and and 47 kilohm
- greater than 47 kilohm
========= Answer is a =========
- The following resistor combination can most nearly replace a single 150 ohm resistor:
- four 47 ohm resistors in parallel
- five 33 ohm resistors in parallel
- three 47 ohm resistors in series
- five 33 ohm resistors in series
========= Answer is c =========
- Two 120 ohm resistors are arranged in parallel to replace a faulty resistor. The faulty resistor had an original value of:
- 15 ohm
- 30 ohm
- 60 ohm
- 120 ohm
========= Answer is c =========
- Two resistors are in parallel. Resistor A carries twice the current of resistor B which means that:
- A has half the resistance of B
- B has half the resistance of A
- the voltage across A is twice that across B
- the voltage across B is twice that across B
========= Answer is a =========
- The smallest resistance that can be made with five 1 k ohm resistors is:
- 50 ohm by arranging them in series
- 50 ohm by arranging them in parallel
- 200 ohm by arranging them in series
- 200 ohm by arranging them in parallel
========= Answer is d =========
- The following combination of 28 ohm resistors has a total resistance of 42 ohm:
- three resistors in series
- three resistors in parallel
- a combination of two resistors in parallel, then placed in series with another resistor
- a combination of two resistors in parallel, then placed in series with another two in parallel
========= Answer is c =========
- Two 100 ohm resistors connected in parallel are wired in series with a 10 ohm resistor. The total resistance of the combination is:
- 60 ohms
- 180 ohms
- 190 ohms
- 210 ohms
========= Answer is a =========
- A 5 ohm and a 10 ohm resistor are wired in series and connected to a 15 volt power supply. The current flowing from the power supply is:
- 0.5 ampere
- 1 ampere
- 2 ampere
- 15 ampere
========= Answer is b =========
- Three 12 ohm resistors are wired in parallel and connected to an 8 volt supply. The total current flow from the supply is:
- 1 ampere
- 2 amperes
- 3 amperes
- 4.5 amperes
========= Answer is b =========
- Two 33 ohm resistors are connected in series with a power supply. If the current flowing is 100 mA, the voltage across one of the resistors is:
- 66 volt
- 33 volt
- 3.3 volt
- 1 volt
========= Answer is c =========
- A simple transmitter requires a 50 ohm dummy load. You can fabricate this from:
- four 300 ohm resistors in parallel
- five 300 ohm resistors in parallel
- six 300 ohm resistors in parallel
- seven 300 ohm resistors in parallel
========= Answer is c =========
- Three 500 ohm resistors are wired in series. Short-circuiting the centre resistor will change the value of the network from:
- 1500 ohm to 1000 ohm
- 500 ohm to 1000 ohm
- 1000 ohm to 500 ohm
- 1000 ohm to 1500 ohm
========= Answer is a =========