Questions Without Answers For Decibels

Question File Number 14



Exam Page | Introduction | Control Panel | Booklist | Order Form | Questions | Study Notes

Amplifier | Mixer  | R Circuit | Resistors | Signals

Abbre  | Certificate | CW  | CW-Test  | Exam  | IARU  | ITU  | NZART  | Internet  | Syllabus

01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 10 | 11 | 12 | 13 | 14 | 15
16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30


  • The input to an amplifier is 1 volt rms and the output 10 volt rms. This is an increase of:
    • 3 dB
    • 6 dB
    • 10 dB
    • 20 dB
    • ==========================
  • The input to an amplifier is 1 volt rms and output 100 volt rms. This is an increase of:
    • 10 dB
    • 20 dB
    • 40 dB
    • 100 dB
    • ==========================
  • An amplifier has a gain of 40 dB. The ratio of the rms output voltage to the rms input voltage is:
    • 20
    • 40
    • 100
    • 400
    • ==========================
  • A transmitter power amplifier has a gain of 20 dB. The ratio of the output power to the input power is:
    • 10
    • 20
    • 40
    • 100
    • ==========================
  • An attenuator network comprises two 100 ohm resistors in series with the input applied across both resistors and the output taken from across one of them. The attenuation of the network is:
    • 3 dB
    • 6 dB
    • 50 dB
    • 100 dB
    • ==========================
  • An attenuator network has 10 volt rms applied to its input with 1 volt rms measured at its output. The attenuation of the network is:
    • 6 dB
    • 10 dB
    • 20 dB
    • 40 dB
    • ==========================
  • An attenuator network has 10 volt rms applied to its input with 5 volt rms measured at its output. The attenuation of the network is:
    • 6 dB
    • 10 dB
    • 20 dB
    • 40 dB
    • ==========================
  • Two amplifiers with gains of 10 dB and 40 dB are connected in cascade. The gain of the combination is:
    • 8 dB
    • 30 dB
    • 50 dB
    • 400 dB
    • ==========================
  • An amplifier with a gain of 20 dB has a -10 dB attenuator connected in cascade. The gain of the combination is:
    • 8 dB
    • 10 dB
    • -10 dB
    • -200 dB
    • ==========================
  • Each stage of a three-stage amplifier provides 5 dB gain. The total amplification is:
    • 10 dB
    • 15 dB
    • 25 dB
    • 125 dB
    • ==========================


tick 

Further details about NZART can be obtained from the web at  NZART. There are several categories of NZART membership which include Transmitting and Non-Transmitting. Anyone interested in radio can join. E-mail enquiries to  nzart@nzart.org.nz will bring details about NZART Membership. On-line details about  Joining NZART - Membership has advantages.
Contact Webmaster at e-mail  webmaster@nzart.org.nz
Compiled Sun Nov 28 2010 at 8:42:55pm


01 |  02 |  03 |  04 |  05 |  06 |  07 |  08 |  09 |  10 |  11 |  12 |  13 |  14 |  15
16 |  17 |  18 |  19 |  20 |  21 |  22 |  23 |  24 |  25 |  26 |  27 |  28 |  29 |  30

Introduction |  Control Panel |  Booklist |  Order Form |  Questions |  Study Notes